Z-Corp Z510 Spectrum Used - $5000.00
- This item has been sold
- City: Shelbyville
- Zip/Postal Code: 40065
- State: Kentucky
- Country: United States
- Listed: May 31, 2017 1:38 pm
- Listed by: 7vyv9dyrk0o
- Expires: This ad has expired
Up for sale is a Z-Corp Z510 Spectrum full color 3d printer, I bought this machine used from another ebay seller 3 years ago and when I received and powered up the printer it needed a new Pogo Card to function 100%. The Seller bought a brand new Pogo Card which fixed the issue the printer was having. I have been running the printer in a special Monochrome mode because I didn’t need to print in full color, it’s a very cheap way to operate these machines and who ever purchases the machine I will give the instructions on how to operate it in this mode as a added bonus.
The printer comes with enough core material to fill the machine which was purchased from 3d systems (OEM materials) at least $2,000 worth, Also comes with a brand new never opened 1 gallon container of 3d systems clear Binder fluid ($800.00) and a unopened 1 gallon container of the wash fluid ($250.00). On top of some consumable materials this printer also comes with a few other items.
2x – 50 foot 9 pin serial cables
1x – hex key set
1x – extra pogo card (I sent it to a business that has 5 of these printers and they tested the card and found nothing wrong with it other then the LED that lights up to do the print head calibration so if your running the machine in monochrome mode it will work just fine.
1x – spitoon parking caps
The printer also comes with the depowdering station which is used to get the extra powder off the prints before you infiltrate them, I had to make the front panel out of a piece of plexiglass as the original glass panel was broke during transit to me but still functions perfectly fine.
I have also modded the machine with a added air filter/blower fan to where the extra powder gets collected when its printing, with out it the powder literally gets everywhere and even can cause it to misbehave due to powder build up. I have also replaced all of the septums for each print head as they were starting to leak.
The machine is currently in its storage mode (distilled water in all the lines and no powder being stored in the machine) so I can not provide any videos of the printer operating but it was fully functioning before I put it into the storage mode.
I set the shipping to local pick up only, but I would be willing ship this freight but it won’t be cheap as it would require me to crate it all up and I will need to charge extra for that.
You may also be interested in these related items.
- Auction Items