Used 3D Systems Viper si2 SLA Stereolithography System - $US$45,999
- Delivery: We ship worldwide, please contact us with your address for a quote
- City: Singapore
- Country: Singapore
- Listed: December 2, 2015 10:33 am
- Listed by: Jelcymore
- Expires: This ad has expired
3D SYSTEMS VIPER SI2 SLA STEREOLITHOGRAPHY SYSTEM w PROCLEAN SL PART WASHER, ACCURA RESIN (BOTTLES/ TANKS)
Technology: Stereolithography, SLA
Material Class: Liquid; Photo Reactive
Two solid imagers in one – for unprecedented versatility
The Viper si2 SLA system is our first solid imaging system to combine standard AND high-resolution part building in the same system. Now, with one machine, you can tackle an unequalled range of solid imaging applications. And you can take advantage of scores of cost-saving, productivity-enhancing innovations, including state-of-the-art components, improved system software, and much more.
A dual resolution and long life laser – another 3D Systems first.
The Viper si2 system lets you choose between standard resolution mode, for the best balance of build speed and part resolution, and high resolution (HR) mode for ultra-detailed small parts and features – all from a carefully integrated digital signal processor (DSP) controlled high speed scanning system with a single, solid-state laser that delivers 100 mW of available power.
Build superior quality parts for every application.
The Viper si2 system builds parts with a smooth surface finish, high accuracy and excellent fine feature detail that require minimal finishing. It’s ideal for a myriad of solid imaging applications, from rapid modelling and prototyping, to patterns for investment casting.
Make: 3D Systems
Model: Viper si2
Type: Stereolithography (SLA) system
PC loaded with Buildstation 5.5.1 software
Maximum Laser Power: 102 mW
Peak Sum Ratio: 0.1771
Beam Width: 9.56 mils
Build Start Overhead: 265.986 seconds
Leveler Calibration: 40.881 seconds
Start Layer (Profiling, Set power, etc.)
Average Time: 4.816 seconds
Average Time: 0.045 seconds
High Resolution Spot
Peak Sum Ratio: 0.250
Beam Width: 3.00 mils
Laser for Viper
Laser Diode Hours: 5456
Minimum Laser Power: 5
Maximum Laser Power: 101
Laser Power: 101mW
Laser Current: 0.1A
Maximum Current: 40.0
X41 Current Limit: 35.00 AMPS
Software Ver: P02.H01
T4: 7492 Ohms
T2: 7684 Ohms
T3: 7644 Ohms
High Speed Scan is Licensed
Chamber Controller Rev. 1.2
Interlock Controller Rev. 1.2
DSP Board is C6713
On-Board Motion Controller
ProClean SL Part Washer
4 Stereolithography Resin steel containers (filled with Accura SL Resin)
1 New in box – Accura Xtreme 10kg Stereolithography Resin P/N 24081-920
3 New in boxes – Accura Xtreme 10kg Stereolithography Resin P/N 24081-902
3 New in boxes – Accura PEAK 10kg Stereolithography Resin P/N 24041-902
Note: You will receive the actual unit shown. Also comes with all components/ items/ accessories shown
This unit is used and is in overall good physical condition. It powers up successfully as shown and responds to commands accordingly (Initialization/ Motion Control of the Elevator, VAT). A laser component/crystal (Capsule assy, Doubler) is faulty and needs to be replaced (part costs roughly US$4K). Preliminary checks shows there are no further known issues with the system. As we do not have the technical expertise to further test the system, we are selling it on an “AS IS BASIS”. Inspection is available, or if you’d like us to perform further tests/checks, please write to us with your set of instructions.
We ship worldwide. Please email us for a shipping quote
You may also be interested in these related items.
- Auction Items