Welcome, visitor! [ Register | Loginrss

Used 2012 3D Systems sPro 60 SLS Center - $$125,000.00 as is, where is. Subject to availability

Used 2012 3D Systems sPro 60 SLS Center
Control PCCure Station
  • City: Tucson
  • State: Arizona
  • Country: United States
  • Listed: May 15, 2019 10:13 am
  • Listed by: lh10u097ylc
  • Expires: 89 days, 23 hours

Description

One (1) used 2012 3D Systems sPro 60 SLS Center, complete with the following specifications:

Build Envelope Capacity (XYZ) – 381 x 330 x 457mm (15” x 13” x 18”)
Powder Layout – Precision Counter Rotating Roller
Layer Thickness Range (typical) – Min 0.08mm (0.003”); Max 0.15mm (0.006”), (0.1 & 0.12mm, 0.004” & 0.0047”)
Imaging System – ProScan™DX Dual Mode High Speed (digital)
Scanning Speed (actual) – 6 m/s and 12 m/s (240” & 480” per sec.)
Laser Power/Type – 70W / CO2
Volume Build Rate – 1.8 liters/hr (110 cu in/hr)
Data Input
Input Data File Format – STL
Network Type and Protocol – Ethernet, IEEE 802.3 using TCP/IP and NFS
Operating System – Windows XP
Electrical Requirements
System – 240V/12.5kVA, 50/60Hz, 3-Phase
Chiller – 200-240V/1-Phase, 50/60Hz, 13A
Space Requirements
Main Unit (minimum for carry-in, WxDxH) – 2077 x 1429 x 2040mm (81.8” x 56.3” x 80.3”)
Main Unit, user interface/doors/gates opened – 3114 x 2795 x 2725mm (122.6” x 110.0” x 107.3”)
Recommended Installation Space – 4500 x 3700 x 3000mm (177.2” x 145.7” x 118.1”)
Operating Environment
Temperature Range – 16-27 ℃ (60-80 ℉)
Temperature Stability – +/- 2 ℃ (+/- 5 ℉)
Relative Humidity -

Ad Reference ID: 8215cdc425b737c6
3DPrinterClassifieds.com is NOT the seller and we are NOT involved in any transaction, and do NOT offer any payment or escrow services. Verify the advertiser before you send any goods or money, and read our buyer/seller tips here. If you suspect a scam, please notify us quoting the above Ad Reference ID and the AD URL.

No Tags

  

You may also be interested in these related items.

  • Auction Items
  • eBay
  •  
Advertise Here Sidebar

Save this Ad


FavoriteLoadingAdd to favorites: Used 2012 3D Systems sPro 60 SLS Center

Save this Ad to your Watch List

* Cookies must be enabled for this feature

Contact the Seller

To inquire about this ad listing, complete the form below to send a message to the ad poster.