Stratasys Fortus/Dimension 1200 3D Printer – UPGRADED TO FORTUS 250MC - $8000
- City: Glassboro
- Zip/Postal Code: 08028
- State: New Jersey
- Country: United States
- Listed: March 3, 2018 9:36 pm
- Listed by: q8qvxcs2fs9
- Expires: This ad has expired
Custom Stratasys Dimension 1200/Fortus 250mc 3D Printer
This unit is set up to be as easy to use as a factory Stratasys but with better specs than a Fortus 250mc and using ABS filament at a fraction of the price!
Due to changing circumstances, we are scaling down our south Jersey-based 3-D printing business. This listing is for (1) Stratasys 250mc-converted commercial printer. We have 2 available as well as an entire business and website as a complete package (message for more details).
This unit is a Stratasys 1200sst which uses the same build/hardware and has been upgraded to even better specs than the 1200es and Fortus 250mc. Printer has been upgraded with the following features:
-Enlarged envelope – roughly 12.3″x10.6″x10.6″ (larger than any 1200 or Fortus 250 printer available), -.013″/.010″/.007″/.005″ layer heights (.005″ is not even an option from Stratasys)
-set up for SR-30 filament but will also run HIPS for very cheap support filament
-set up for ABS that is readily available from our vendor at 1/8 the price of Stratasys cartridges
-runs on Stratasys Insight software for ultimate control in build options
-able to reset filament chips as needed for free, etc
All this and operates just as simple as a factory machine. Build table and ways were just serviced so the printer is ready to go to work.
Includes a handful of accessories, several printing trays and software. Also will be sent with some material and support filament to get started. This is everything you need to get 3D printing immediately.
See OEM specs below:
The SST 1200es uses Soluble Support Technology in which the supports are dissolved after printing in a solution.
Dimension SST 1200es: $32,900*
ABSplus in ivory, white, black, red, olive green, nectarine, fluorescent yellow, blue or gray.
Soluble Support Technology (SST)
254 x 254 x 305 mm (10 x 10 x 12 inches)
.254 mm (.010 in.) or .33 mm. (.013 in.) of precisely deposited ABSplus model and support material.
Windows® XP / Windows Vista® / Windows® 7
Ethernet TCP/IP 10/100Base-T
Size and Weight:
838 x 737 x 1143 mm (33 x 29 x 45 in.)
148 kg (326 lbs.)
110-120 VAC, 60 Hz, minimum15A dedicated circuit;
or 220-240 VAC, 50/60 Hz, minimum 7A dedicated circuit.
CE / ETL
Buyer responsible for arranging freight but I will assist as much as possible. Printer will be professionally crated free of charge.
You may also be interested in these related items.
- Auction Items