Welcome, visitor! [ Register | Loginrss

2011 Stratasys Fortus 400mc 3D Production System - $30000

2011 Stratasys Fortus 400mc 3D Production System
SidePrint AreaControl PanelRear


Online Auction for Government Surplus – Auction Ends 9/20/19 – To view auction details go to www.govdeals.com and “Search For” 3354-152. Click the QAL box and then hit search.

Up for sale is a 2011 Stratasys Fortus 400mc 3D Production System. Fused Deposition Modeler

Was used by Oregon State University and no longer needed. Unit is being replaced with a smaller unit.

In full working order.

The Nominal AC Line Voltage requirements of your T-Class system are 230 VAC 3-Phase ± 5%, frequency of 46 Hz to 65 Hz stable, phase balance ± 3%, and a 20 amp circuit. Operation of your system outside this range, even for short periods, is not recommended, as it will result in degraded system performance and component life expectancy. The ideal output voltage from the transformer is 230 VAC to 235 VAC.

3 Phase

Heat Output 12,000 BTU/hr – Max.

Compressed Air – 55 psi with a minimum flow of 2.5 CFM. The maximum pressure must be less than 145 psi Maximum temperature of operating environment: 85°F (29°C) Maximum dew point: 78°F (25°C)

Space Requirements Side Clearance: 30 inches (76.29 cm) on each side Rear Clearance: 12 inches (30.28 cm) Front Clearance: 36 inches (91.44 cm) Vertical Clearance: 28 inches (71.12 cm)

Dimentions: Width: 50.5 inches (128 cm) Depth: 35.25 inches (89.64 cm) Height: 77.25 inches (195.63 cm) Weight: 1,309 lbs.

Included: Transformer any extra parts Manuals 3D product

Forklift available and loading dock.

The final maintenance on the unit is scheduled in a few weeks.

Please see pictures for additional description. Defects not shown/known/listed may exist.

Additional Spec.’s may be available, for further information please call or send us a message and we will find what we can. See auction page for contact information.

GovDeals.com – Your platform to bid on government auctions and buy government surplus.


Ad Reference ID: 2655d78eef66f0d7
3DPrinterClassifieds.com is NOT the seller and we are NOT involved in any transaction, and do NOT offer any payment or escrow services. Verify the advertiser before you send any goods or money, and read our buyer/seller tips here. If you suspect a scam, please notify us quoting the above Ad Reference ID and the AD URL.

No Tags


You may also be interested in these related items.

  • Auction Items
  • eBay
Advertise Here Sidebar

Save this Ad

FavoriteLoadingAdd to favorites: 2011 Stratasys Fortus 400mc 3D Production System

Save this Ad to your Watch List

* Cookies must be enabled for this feature

Contact the Seller

Phone Number: 8006130156 ext 5

To inquire about this ad listing, complete the form below to send a message to the ad poster.